Vertical Lifting Type Tower Smart Parking Elevator Parking System

Product Detail

Vertical Lifting Parking System/Tower Parking System (BTP-PCS)




Working Principle

The BTP-PCS Vertical Lifting Parking System/Tower Parking System (10-35 Levels) operates in following ways:

Car parking process: firstly rotating table rotates to station, and then lifter lowers down. The driver drives the car in and gets out to the operation panel to park the car by swiping card or manual button operation. Then lifer lifts the car up to a bit higher position than the ordered level, the comb parking pallet slides to the lifting passage way, lifer descends the car on the comb parking pallet, and comb parking pallet moves the car to ordered parking space. Then lifter descends down for another car parking or retrieving.

Car retrieving process: comb parking pallet slides the car to the lifting passage way, lifer goes up and lifts the car on the comb lifter, comb parking pallet slides to its previous position, lifter descends the car on the ground rotating table, rotating table rotates to change the car’s direction, then the operator drives the car out.




Characteristics

The BTP-PCS Vertical Lifting Parking System--Tower Parking System (10-35 Levels) has the advantages of:

Can be designed with hydraulic drive or traction motor drive. The lifting speed of traction motor drive can be up to 120m/min and the lifting speed of hydraulic drive can be up to 60m/min;

Equipped with a series of safety protection devices, including anti-falling frame, anti-collision device, anti-overload device, anti-roof falling device;

Its operation mode can be manual button operation or swiping card;

With higher space use ratio, more flexible than previous vertical lifting type parking equipment;

Can be designed with levels no higher than 35 levels and its parking capacity can be customized;

With the characteristics of higher safety, lower cost and maintenance cost. computer fault diagnosis system and PLC logic loop, fast maintenance and easy fault removal;

The equipment is processed by galvanizing and high-grade anti-corrosion painting;

According to customers’ different demands, its outside packing can be designed as totally enclosed packing, semi-enclosed packing, simple packing, and non-packing.

Technical Parameters
Drive mode	Hydraulic drive / traction motor drive
Car available	Large cars
Levels of system	35 levels max
Car size (L*W*H)	=5300mm*1900mm*2050mm(1st level) =5300mm*1900mm*1550mm(2-35 levels)
Car weight	=2300Kg
Operation mode	Swiping card / manual button operation
Operation speed	Lifting: 60m/min by hydraulic drive / 120m/min by traction motor
	Sliding: 7.5m/min
	Turning: 4rpm
Motor power	Lifting: 30Kw
	Sliding: 0.2Kw
	Turning: 1.5Kw
Power source	Power source: 3 phase 5 wires, 380V/50HZ
	Operating voltage: single phase, AC 220V/50HZ
Vehicle parking quantity	Based on customers' requirements